DUALITY Part II - Initial Access and Tradecraft Improvements

DUALITY Part II - Initial Access and Tradecraft Improvements
Cyber Labs

09 of 20

This insight is part 09 of 20 in this Collection.

June 14, 2024 10 mins

DUALITY Part II - Initial Access and Tradecraft Improvements

Designing an Integrated Business and People Strategy for the Future of Insurance Hero Banner

This blog post discusses tradecraft improvements and how the same pipeline can be used for initial access.

In the first part of the DUALITY series, we introduced the idea of DUALITY and its pipeline to backdoor DLLs for persistence. The tradecraft associated with the backdooring process and process injection, with regard to modern EDR capabilities, was relatively primitive. An easy detection opportunity for AV / EDR companies from the first blog post would be to signature the “.duality” section added to backdoored DLLs. In this blog post, we will discuss improvements to tradecraft for DUALITY.

We will also discuss how the same pipeline can be utilized for initial access by introducing DUALITY’s web-based stager, which contains several useful features such as low-privilege DLL enumeration to give the operator the remote option of which DLL to backdoor, as well as the ability to handle multiple, simultaneous payload detonations in order to handle the backdooring of dependencies from multiple hosts.

Note that we have intentionally released a more neutralized version of DUALITY in Part I. We unfortunately do not intend on releasing a completely weaponized version of DUALITY primarily because we want to limit the potential damage it might cause and secondarily due to the amount of research time it involved.

Tradecraft Improvements

When it comes to tradecraft versus EDR, there are two primary categories we will consider for this iteration:

  • Signature-based detections: Which parts of the DLL that DUALITY drops to disk for persistence or initial access can be signatured?
  • Behavioral-based detections: During DUALITY’s execution, which aspects of DUALITY does EDR have visibility into?

We’ve intentionally left out reputation-based detections as competent stager / beacon communications setup is up to the reader.

Signature-Based Detections

We previously presented a few ideas for detecting the first iteration of DUALITY. One key issue was that section names added to backdoored DLLs are hardcoded. Section names such as “.duality” should be a red flag. To resolve this, any added sections are now randomly named during the shellcode compilation and packing process.

This is depicted in the following screenshot, where the C# pipeline program replaces template variables in the shellcode-C (SCC) file prior to compilation for each DLL.

Replacing Template Variables in SCC File

Behavioral-Based Detections

The first iteration of DUALITY performed process injection by resolving function pointers from the current process’s modules / functions, which are hooked by AV / EDR. To resolve this, we’ve introduced functionality in the initial access stager that will send the host’s “ntdll.dll” file to the backdooring backend, along with the DLLs we are interested in backdooring. This will allow us to pack “ntdll.dll” as a section to the backdoored DLL. In our shellcode, we will then dynamically resolve “clean” functions from this clean packed “ntdll.dll”, such as “NtAllocateVirtualMemory” or other “Nt” functions that malware may utilize.

We go a step further beyond this by combining the assembly from the packed “ntdll.dll” section with the syscall instruction from the “ntdll.dll” in the current process’s memory space, in order to perform an “indirect syscall”. This is technically overkill for evading EDR hooks, as we are not operating from a random heap location (such as the case for an implant operating from memory) when we execute these “Nt” calls. When the stack trace is examined after a syscall is performed, if we are operating from a disk-backed image of a PE, the syscall instruction will be coming from a valid, executable section in memory that reflects a section on disk. This is how DUALITY operates. However, if this syscall instruction originated from a random heap address that does not reflect some valid section on disk (such as when an implant is operating from memory), that would likely be a high-fidelity indicator that something malicious is executing.

The following function from the SCC template resolves a “clean ntdll.dll” function from the packed section passed in as a “buffer” address. The passed in “ntdllHandle” variable contains a handle to the in-process hooked “ntdll.dll”, which we can use for an indirect syscall.

Resolving Functions from Packed ntdll.dll

Later in the code we can observe how the indirect syscall is constructed:

Construction of Indirect Syscall

The following depicts the function “create_jmp_opcode”:

Creating "jmp" Opcode for Indirect Syscall

Note that the usage of common functions such as “memcpy” are prefixed with “_” in the case of “_memcpy”, because we assume no access to the C runtime during shellcode execution; therefore, we use our own version defined in the Position Independent Code (PIC) so we can support our shellcode. Remember, all of this C code gets compiled into PIC and operates from our “.duality” section (which is going to be a randomly named section during compilation).

DUALITY for Initial Access

The same pipeline utilized for persistence can be re-purposed to be used for initial access. The “persistence” pipeline currently performs the following:

  • Receive DLLs to backdoor from persistence script
  • Compile pre-written shellcode-C file (SCC file)
  • Inject / Backdoor DLLs with compiled shellcode

For this blog post, we are only sharing how our implementation of the initial access web stager works. Note that the pipeline for persistence as well as the persistence script are available publicly.

Auth Headers + C2 Agnostic

The first feature of the DUALITY operator dashboard is that authorization keys are required in order for the stager to reach out. These keys can be generated and revoked at will. This allows an operator to detonate the stager, stage in and implant, and then render the stager non-operational.

Auth Keys Utilized

For the second feature, note the “SC Prefix” text box. This allows the stager to be associated with any previously uploaded shellcode (from any C2) to be utilized as part of the initial access pipeline. A PowerShell one-liner and web friendly one-liner are present for public proof-of-concept and for testing against systems with basic AV / EDR. We recommend creating a stealthier stage-0 one-liner to load in the DUALITY stager, which will perform the actual backdooring.

Logging

Since the backdooring process takes up to 5 minutes sometimes due to enumeration of low-privilege DLLs, uploading / downloading files, and the backdooring process in the backend itself, it’s useful to the operator to see which step in the backdooring process the stager is in. This is rendered to the operator from the DUALITY dashboard.

Logging for Backdooring Process

Payload Detonation Information + Staging Rejection

When a callback comes in, the operator can examine important information such as the username, user domain, and external IP address registrant organization. This can greatly inform the payload detonation information of the stager and help the operator reject payload detonations if they occur within sandbox environments. If sandbox execution takes place, it is crucial for operators to have the ability to prevent payloads from being fully staged. The prevention can result in truly malicious payloads being marked as benign, buying more time for the operation. If the stager detonation context appears satisfactory however, the operator may click the red callback ID link.

Stager Detonation Information

Simultaneous Detonation

The operator is also able to handle simultaneous detonation in cases where multiple callbacks are received. In this way, the backdooring process can take place for multiple hosts in parallel.

Simultaneous Detonation

Backdoor Choice

When the operator clicks a callback ID (red link), they are taken to the backdooring selection screen where they can choose to backdoor a DLL from the enumerated DLLs. Remember that the stager had enumerated low-privilege locations for DLLs and associated EXEs prior to calling back with the options available. The operator also has the option to specify an executable associated with the DLL. Usually, this should be the executable that immediately loads in the DLL after spawning. For example, Microsoft Teams loads in “ffmpeg.dll” after spawning.

In any case, DUALITY is written to allow execution continuity, so the user is not affected by DUALITY logic. If no executable is specified, the DUALITY stager will backdoor the selected DLL but will not force-restart the associated process. For example, if we target “ffmpeg.dll”, DUALITY will send this DLL to the backend, backdoor it, and then swap it out with the original. This way, when Microsoft Teams naturally closes and restarts (such as after system reboot), the backdoored DLL is loaded into Microsoft Teams and the DUALITY logic runs.

If an executable is specified, the DUALITY stager will backdoor the DLL, and then terminate all processes with that executable’s name. The stager will then restart the executable. This allows for obtaining a shell immediately, rather than waiting for natural program usage.

Sometimes, no desirable program to be backdoored is available. In this case, the operator can specify an index of “-1”, which will utilize a generic backdoored DLL and load the DUALITY logic using a short-lived “rundll32” process. One “feature” of rundll32 is that even if you specify a non-existent entry point, it will do you the favor of running “DLLMain” anyway, which will run your DUALITY logic, and then inform you that the entry point does not exist. This works well in cases where no desirable DLLs to backdoor are present. This is assuming you backdoor “DLLMain”, which is what the public proof-of-concept does.

Backdooring Choice

Future Plans

Some items in this iteration of DUALITY address the previous version’s “Future Plans” section. There are other items left in the public release version to improve tradecraft. Hopefully, this serves as pointers to where AV / EDR detections may exist.

  • Sign DLLs: It would be relatively trivial to add a code signing step in the backdooring pipeline.
  • Encrypt “NTDLL” section: The presence of an unencrypted “ntdll.dll” as a section is an easy / trivial detection opportunity. The way around this is to encrypt the section while at rest and decrypt it competently during execution. If you’re an AV / EDR company, start here to detect this iteration of DUALITY’s public proof-of-concept.

© Aon plc. 2024
All rights reserved with special acknowledgement to Faisal Tameesh (@primal0xF7) for his research on this material.

About Cyber Solutions:

Aon’s Cyber Solutions offers holistic cyber risk management, unsurpassed investigative skills, and proprietary technologies to help clients uncover and quantify cyber risks, protect critical assets, and recover from cyber incidents.

General Disclaimer

This document is not intended to address any specific situation or to provide legal, regulatory, financial, or other advice. While care has been taken in the production of this document, Aon does not warrant, represent or guarantee the accuracy, adequacy, completeness or fitness for any purpose of the document or any part of it and can accept no liability for any loss incurred in any way by any person who may rely on it. Any recipient shall be responsible for the use to which it puts this document. This document has been compiled using information available to us up to its date of publication and is subject to any qualifications made in the document.

Terms of Use

The contents herein may not be reproduced, reused, reprinted or redistributed without the expressed written consent of Aon, unless otherwise authorized by Aon. To use information contained herein, please write to our team.

Aon's Better Being Podcast

Our Better Being podcast series, hosted by Aon Chief Wellbeing Officer Rachel Fellowes, explores wellbeing strategies and resilience. This season we cover human sustainability, kindness in the workplace, how to measure wellbeing, managing grief and more.

Aon Insights Series Asia

Expert Views on Today's Risk Capital and Human Capital Issues

Aon Insights Series Pacific

Expert Views on Today's Risk Capital and Human Capital Issues

Aon Insights Series UK

Expert Views on Today's Risk Capital and Human Capital Issues

Construction and Infrastructure

The construction industry is under pressure from interconnected risks and notable macroeconomic developments. Learn how your organization can benefit from construction insurance and risk management.

Cyber Labs

Stay in the loop on today's most pressing cyber security matters.

Cyber Resilience

Our Cyber Resilience collection gives you access to Aon’s latest insights on the evolving landscape of cyber threats and risk mitigation measures. Reach out to our experts to discuss how to make the right decisions to strengthen your organization’s cyber resilience.

Employee Wellbeing

Our Employee Wellbeing collection gives you access to the latest insights from Aon's human capital team. You can also reach out to the team at any time for assistance with your employee wellbeing needs.

Environmental, Social and Governance Insights

Explore Aon's latest environmental social and governance (ESG) insights.

Q4 2023 Global Insurance Market Insights

Our Global Insurance Market Insights highlight insurance market trends across pricing, capacity, underwriting, limits, deductibles and coverages.

Regional Results

How do the top risks on business leaders’ minds differ by region and how can these risks be mitigated? Explore the regional results to learn more.

Human Capital Analytics

Our Human Capital Analytics collection gives you access to the latest insights from Aon's human capital team. Contact us to learn how Aon’s analytics capabilities helps organizations make better workforce decisions.

Insights for HR

Explore our hand-picked insights for human resources professionals.

Workforce

Our Workforce Collection provides access to the latest insights from Aon’s Human Capital team on topics ranging from health and benefits, retirement and talent practices. You can reach out to our team at any time to learn how we can help address emerging workforce challenges.

Mergers and Acquisitions

Our Mergers and Acquisitions (M&A) collection gives you access to the latest insights from Aon's thought leaders to help dealmakers make better decisions. Explore our latest insights and reach out to the team at any time for assistance with transaction challenges and opportunities.

Navigating Volatility

How do businesses navigate their way through new forms of volatility and make decisions that protect and grow their organizations?

Parametric Insurance

Our Parametric Insurance Collection provides ways your organization can benefit from this simple, straightforward and fast-paying risk transfer solution. Reach out to learn how we can help you make better decisions to manage your catastrophe exposures and near-term volatility.

Pay Transparency and Equity

Our Pay Transparency and Equity collection gives you access to the latest insights from Aon's human capital team on topics ranging from pay equity to diversity, equity and inclusion. Contact us to learn how we can help your organization address these issues.

Property Risk Management

Forecasters are predicting an extremely active 2024 Atlantic hurricane season. Take measures to build resilience to mitigate risk for hurricane-prone properties.

Technology

Our Technology Collection provides access to the latest insights from Aon's thought leaders on navigating the evolving risks and opportunities of technology. Reach out to the team to learn how we can help you use technology to make better decisions for the future.

Top 10 Global Risks

Trade, technology, weather and workforce stability are the central forces in today’s risk landscape.

Trade

Our Trade Collection gives you access to the latest insights from Aon's thought leaders on navigating the evolving risks and opportunities for international business. Reach out to our team to understand how to make better decisions around macro trends and why they matter to businesses.

Weather

With a changing climate, organizations in all sectors will need to protect their people and physical assets, reduce their carbon footprint, and invest in new solutions to thrive. Our Weather Collection provides you with critical insights to be prepared.

Workforce Resilience

Our Workforce Resilience collection gives you access to the latest insights from Aon's Human Capital team. You can reach out to the team at any time for questions about how we can assess gaps and help build a more resilience workforce.

More Like This

View All
View All
Subscribe CTA Banner